Welcome to Jiangsu Pengfei Group Rotary kiln system Special website
Rotary kiln systemThe rotary kiln system of Jiangsu Pengfei Group includes a rotary kiln, preheater, dryer, cooler, and rotary kiln control system; The main products include: cement lime rotary kiln, nickel iron lithium roasting rotary kiln, steel pellet, titanium dioxide,
Pengfei Products catalog > Rotary kiln system
Keywords： Cement rotary kiln, chemical rotary kiln, metallurgical rotary kiln, lithium salt roasting rotary kiln, lithium carbonate rotary kiln, garbage incinerator, kaolin rotary kiln, magnesium oxide rotary kiln, active lime rotary kiln

A new dry pre decomposition cement rotary kiln with a diameter of 4.8 × 76m

Overview: 1. Technical performance Dry production pre decomposition furnace Specification: 4.8 76m rotary kiln Production capacity: 5000t/d Slope: 4% Speed: Main transmission 0.35-4r/min; Auxiliary transmission 8.52r/h Number of supports: 3 levels Sealing type: kiln head, steel sheet sealing; Kiln tail, cylinder compression seal Kiln head cooling: air-cooled Wheel type: Hydraulic wheel (with wheel pump station) Transmission type: single transmission Main drive motor: ZSN4-400-092 Power: 630kW, speed: 1500r/min, rated voltage: 440V Main gearbox: JH710C-SW...

Tel: +86-513-88755311 88755027

Technical Parameter

    Technical Parameter

    1. Technical performance
    Dry production pre decomposition furnace
    Specification: φ 4.8 × 76m rotary kiln
    Production capacity: 5000t/d
    Slope: 4%
    Speed: Main transmission 0.35-4r/min; Auxiliary transmission 8.52r/h
    Number of supports: 3 levels
    Sealing type: kiln head, steel sheet sealing; Kiln tail, cylinder compression seal
    Kiln head cooling: air-cooled
    Wheel type: Hydraulic wheel (with wheel pump station)
    Transmission type: single transmission
    Main drive motor: ZSN4-400-092
    Power: 630kW, speed: 1500r/min, rated voltage: 440V
    Main gearbox: JH710C-SW305-40
    Cooling coil cooling, center distance 1570mm, nominal speed ratio 40
    Auxiliary motor: Y225M-4  IP44  45KW
    Auxiliary gearbox: JH220C-SV302-31.5
    2. Main components
    Cylinder section
    transmission
    Supporting device (with stop wheel supporting device)
    Wheel oil pump station
    Sealing device for kiln head and kiln tail
    Cooling air duct
    Special tools for rotary kilns, etc.
    Total weight of equipment: 841000+13000 (special tool for rotary kiln)=854000kg
    2.1 Cylinder section
    2.1.1 Cylinder body
    The thickness of the cylinder steel plate is 28-85
    The total weight of the cylinder is 36800kg, of which 20g is 366750kg; The rest are Q235.
    2.1.2 Pad
    The cylinder gasket adopts a structure that is easier to replace.
    2.1.3 Wheel Belts
    Adopting a rectangular solid structure, the tire material is cast steel, and it has undergone normalizing treatment.

Previous: Φ 5.0 × 74m rotary kiln
Next: Calcination of spodumene battery grade lithium in a rotary kiln with a daily output of 350 tons

ADD:Benjia,Ji,North Suburbs of Hai'an County,Jiangsu Province,PRC

TEL:0086-513-88755311 88755027

FAX:0513-88755315

E-MAIL:pf@pengfei.com.cn

Copyright © 2025 Jiangsu Pengfei Group All Rights Reserved.